How To Replace Patio Chair Covers With Fabric

How to Replace Patio Chair Covers with Fabric

Replacing patio chair covers with fabric is a relatively simple task that can be completed in a few hours. By following these essential steps, you can ensure that your patio chairs are protected from the elements and look their best.

Materials you'll need:

New outdoor fabric or vinyl
Scissors
Measuring tape or ruler
Sewing machine or needle and thread
Iron and ironing board (optional)

Step-by-Step Instructions:

Remove the old covers. Start by removing the old covers from the chairs. Most covers are attached with Velcro or ties, so simply unfasten them and remove the covers.
Measure and cut the fabric. Measure the length and width of the chair seat and back. Add 2 inches to each measurement to allow for seams. Cut the fabric to the correct size.
Sew the seat cover. Place the fabric right side up on a flat surface. Fold the edges over by 1 inch and press them down with an iron. Fold the edges over again by 1 inch and press them down. Sew the edges together to create a hem.
Sew the back cover. Follow the same steps to sew the back cover. Fold the edges over by 1 inch and press them down. Fold the edges over again by 1 inch and press them down. Sew the edges together to create a hem.
Attach the covers to the chairs. Place the seat cover over the chair seat and pull it tight. Tie the straps or Velcro the cover in place. Place the back cover over the chair back and pull it tight. Tie the straps or Velcro the cover in place.